...
...
...
This document explains the use and functionality of the feature AFK.
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Enable AFK from your Control Panel to set up a display Warning message and Timeout Message on your session. |
Prepare to execute instructions
| Info |
|---|
Before starting the first step, make sure you have:
|
...
|
...
|
...
- To complete this guide, your working environment must meet all the requirements above. If you have not completed any of the points, follow the link to the appropriate instruction and complete it first.
Instructions
...
What is AFK:
AFK is a feature that can be enabled and Disabled from the Control Panel. If AFK is enabled then it is used to set up a display Warning message and Timeout Message on the user session which has been idle for the time set in the Control Panel AFK warn Timeout(minutes) and AFK Close Timeout(minutes).
| Note |
|---|
If IsAFKenabled is not selected in AFK, then the Warn timeout and Close timeout doesn't apply. |
To configure the AFK feature in the Control Panel follow these steps:
...
| Info |
|---|
Go to : Control Panel → Select your App from Step 1: Select an App → Select your Config from: Step 2: Select a Config → Edit → Session |
Step 1. Check the box of IsAFK Enabled
| Note |
|---|
If IsAFK Enabled is not selected, then the Warn Timeout and Close Timeout will not be applied later on the user session. |
Step 2. Set AFK warn Timeout (Minutes)
...
| Tip |
|---|
Example: 0.2 mins (AFK warnTimeout) 0.4 mins (AFK closeTimeout). |
...
1.6 Click the Save button.
NOTE: Make sure that after every change you click on Save button.
| Note |
|---|
Failing to do so the changes wont be saved. |
...
Image 6. Step 1. Configure The AFK: Save Config
Step 2. Check that the AFK Works Correctly
...
2.2 Queue screen displays with count down 1,2,3 and Car configuration displays.
...
2.4 The count down displays in the popup and when the AFK close timeout reaches the session it terminates and the user is kicked out of the session.
...
Click Save after setting the time in the field.
Step 3. Set AFK closeTimeout (Minutes)
Click Save after setting the time in the field.
Step 4. Open your App
Step 5. Do not use your mouse and/or keyboard
Don’t perform any action on your App. Don’t click on anything for a while.
Step 6. An AFK warning display on the screen
This screen displays with a count down when the time you have set for the warn Timeout (minutes) feature has reached the end.
Step 7. Click Continue Streaming to go back to the session
| Info |
|---|
If you still don’t use any mouse or keyboard keys after the AFK Timeout warning, the session gets terminated and you will be kicked out because the AFK close Timeout has reached the end. (i.e. the countdown is over). |
Step 7.Start a new Session in a new Tab
| Info |
|---|
Note: AFK is applicable even when the tab is minimized. |
...
Now you are ready to apply the AFK feature to your App!
Was this article helpful? Comment Below. Let us know your feedback.
Click Page Feedback on top of the article. Select an emoji. Tell us how helpful this page was.
Need help? Contact Support
If you still need help, contact support to get your issue resolved quickly.
Submit a new request at E3DS support portal or send an Email at support@eagle3dstreaming.com.
Seek advice. Connect with others. Share your experiences. Join our lively E3DS Community Forum today.