Set up the binary EL Launcher on your computer and stream your Apps from your Hardware.
...
The following instructions will guide you on how to:
Set up the EL.
Start the EL automatically upon every Windows login.
...
Click OK.
Restart the instance.
Go to C: Drive on your Computer to the “EL.zip“. (previously downloaded from the New Control Panel to the C: Drive).
Extract the “EL.zip“ folder. (It contains a config_EL.json file and an EL.exe file) (See image below)
...
| Info |
|---|
Note: After extracting the zip file, you may see 2 .exe files (as shown in the image below). When you click EL.exe, the |
...
Collect your API Key and username ( follow this document :Getting API Key)
Open the “config_EL.json“ with Notepad (See image below)
...
Paste the API Key in the config_EL.json file (“apikey” : “ “ )
Paste your username in the config_EL.json file (“username” : “ “)
Save the file.
Open the “EL.exe“ file.
A terminal window will appear. Wait 1 to 2 minutes (i.e. the time to connect the machine to Eagle 3D’s system until the message “Ready to serve pixel streaming“ appears).
...
...
Now you have
...
finished the
...
EL Launcher setup successfully!
To check the success of your setup, you should:
Upload an App in the New Control Panel. (Follow this tutorial).
Play the App. (Follow this tutorial).
| Note |
|---|
If the App is running, then the installation setup was successful. If not, please you will get errors. Please contact Support. |
...
Make the
...
EL Auto-Start every time you login to Windows
...
, follow the steps below:
Starting the EL automatically upon every Windows startup
...
Now the Binary EL will Auto-Start every time you log into Windows!
...
Notes
...
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Please note that one One running EL can serve only one user at a time. (1 CCU per License). |
| Info |
|---|
Please keep the terminal window open.Closing because closing it will stop the stream. Also, don’t Don’t click inside of the EL’s black window or any other window started by the stream. If clicked by mistake, just press the Esc button one time. |
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
It is possible to start more than one “EL.exe“ in a single PC to run multiple stream from the same PC but this might cause poor streaming experience due to the lack of hardware resources like CPU, GPU or RAM. |
| Info |
|---|
Tip : On Sleep mode, the Stream stops. You need to make sure the EL is running non stop. You can change it from your computer’s settings. |
Warning 🛑
If you see the error below while streaming your App in the Browser, the stream should be working still.
...