This document is a tutorial that how to use the console commands in pixel streaming quality control menu from config in your applications.
Demo Video:
Prerequisites
For this document, you will need access to the Control Panel. Please contact support if you don’t have access.
You will need to have a UE application to upload on the platform. For that, you will need these documents :
- To complete this guide, your working environment must meet all the requirements above. If you have not completed any of the points, follow the link to the appropriate instruction and complete it first.
Instructions
STEP 1. Enable the feature in your config
Open your config edit menu from Step 2 : Create a Config in the Control Panel.
Go to UI tab
Enable “Show Pixel Streaming Quality Control” and click save.
This will now enable you to use commands from a GUI in your application
STEP 2. Run your application
Type your command here instead of “stat fps”.
Click “Send cmd” and your command will be sent.
Was this article helpful? Comment Below. Let us know your feedback.
Need help? Contact Support
If you still need help, contact support to get your issue resolved quickly.
Submit a new request at E3DS support portal or send an Email at support@eagle3dstreaming.com.
Seek advice. Connect with others. Share your experiences. Join our lively E3DS Community Forum today.
Add Comment