Eagle 3D Streaming

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 10 Next »

Use the Console Commands in the Quality Control Menu from the Config in your Apps.

Demo Video:

2024-05-03 18-36-13.mp4

In this video a command “Exit” was used which caused the streamer to close.

It was a demonstration of executing the console commands.

Prerequisites

  1. Access to the Control Panel.

  2. An UE App to upload on the platform. Refer to these documents and this article.

Instructions

Step 1. Enable the feature in your config

  1. Go to : Control Panel > Step 2 : Select a Config > Edit

image-20240503-181204.png
  1. Go to : UI Tab.

  2. Enable “Show Pixel Streaming Quality Control” and click save.

See this document for more details on the Quality Control Menu.

image-20240503-175416.png
  1. This will now enable you to use commands from a GUI in your application

Step 2. Run your App

  1. Type your command here instead of “stat fps”.

image-20240503-132558.png
  1. Click “Send cmd” and your command will be sent.


Need help? Contact Support

Submit a new request at E3DS support portal.

Requests sent on weekends will not be addressed until the following business day.

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.