Use Console Commands in the Quality Control Menu
Learn to use the Console Commands in the Quality Control Menu from the Config in your Apps.
Demo Video :
In this video a command “Exit” was used which caused the streamer to close.
It was a demonstration of executing the console commands.
Prerequisites
For this document, you will need :
Access to the Control Panel. (Please contact support if you don’t have access.)
An UE App to upload on the platform. Refer to these documents and this article.
Instructions
Step 1. Enable the feature in your config
Go to : Control Panel > Step 2 : Select a Config > Edit
Go to : UI Tab.
Enable “Show Pixel Streaming Quality Control” and click save.
This will now enable you to use commands from a GUI in your application
Step 2. Run your App
Type your command here instead of “stat fps”.
Click “Send cmd” and your command will be sent.
Was this article helpful? Comment Below. Let us know your feedback.
Need help? Contact Support
If you still need help, contact support to get your issue resolved quickly.
Submit a new request at E3DS support portal or send an Email at support@eagle3dstreaming.com.
Seek advice. Connect with others. Share your experiences. Join our lively E3DS Community Forum today.