When you upload an app it undergoes 6 phases in the upload sequence to finally get uploaded, installed and ready to Launch from the new Control Panel. In this section we will discuss what happen when you upload an app.
| Info |
|---|
Color code for the upload sequence: Green : Passed Red : Error Yellow : Warning |
Phase 1. Application Review
...
In this phase application is reviewed by the system. The system checks:
(i) Whether pixel streaming is enabled or not
...
If the app app passed this system check then you will see the success signal (Green Color)
| Note |
|---|
If pixel plugin is not enabled then you will get an warning (Yellow Color) about it. But you can proceed to application upload |
...
phase in this case.  |
| Warning |
|---|
App name (Figure 3) and .exe file (Figure 4) name in the root of ZIP must be same. You have two options to ensure this:
|
| Warning |
|---|
If the uploaded ZIP file doesn’t contains UE app then you will get an warning (Yellow Color). This time you will not be able to proceed to the next stage. When you will click on “UPLOAD” button you will get an error message (Figure 4)   |
Phase 2. Upload Application
...
The system will automatically start uploading the app once you click ‘Upload’ .(Figure 5) and upload will be completed if everything is ok (Figure 6)
...
| Warning |
|---|
If the upload process gets interrupted, the test fails (i.e. error in Red). Click 'RETRY’ to upload again. This will take you back to |
...
phase 1.  |
Phase 3. Acquiring Application
This step phase is automatically start when the App is done uploading at 50%. In this step phase your uploaded ZIP file is stored in a remote machine or device.
...
| Warning |
|---|
If the ZIP file is incomplete or missing essential files and folders, this phase may result in an error.  |
Phase 4. Preparing Application
In this step phase the ZIP file is extracted and installed in the remote machine or device and prepared for final testing and streaming.
...
| Warning |
|---|
If the ZIP file is incomplete or missing essential files and folders, this phase may result in an error.  |
Phase 5. Application in Queue
...
If multiple apps are uploaded simultaneously, they will be in a queue,. This test may take longer to complete if the queue size is large, otherwise it will go to the next stage in a short period of time.
...
| Note |
|---|
This test may take long period of time if the queue size is large. |
Phase 6. Testing Application
...
After all the phase of the testing your app will be either ready to stream (Figure 1116) or will give Error Testing (Figure 1217).
| Warning |
|---|
Testing error occurs when you have not enabled pixel streaming in you project  |
...
💬 Ask questions and help your peers Community Forum
📄 Need help? Contact Support